c. This limit applies for pipe with OD > 323.9 mm (12.750 in). d. For intermediate grades, the specified minimum tensile strength for the weld seam shall be same value as was determined for the pipe body using footnotee. For pipe a).requiring longitudinal testing, the maximum yield strength shall be 495 MPa (71 800 psi). f.
API 5L X100 PSL2 Seamless Pipe X100 Grade Steel Pipe The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade. API 5L X100 Pipe Carbon Steel Seamless Pipes are carbon steel pipes, strictly manufactured as per API (AMERICAN PETROLEUM INSTITUTE) to meet the clients requirements. API X100 steel pipes commonly used in offshore pipeline
Steel grade refers to the yield strength of the products. It can be divided into nine categories of steel grade:H-40, J-55, K-55, N-80, L-80, C-90, T-95, P-110, Q-125. In it, the letters are stand for the steel grade, which has no relation with the properties and the number refers to the minimum yield strength.
ASTM A106 Grade B Pipe Specification - Steel Pipe, OCTG ASTM A106 Grade B Tensile Strength and Yield Strength. Elongation formula:In 2 in. [50mm], shall be calculated by:e = 625 000 A^0.2 / U^0.9 For inch-pound Units, e = 1940 A^0.2 / U^0.9. Explanations of e, A, and U, please find here. (Equation same with ASTM A53, API 5L pipe.)
CN101892443A - High strength and high toughness The invention provides a high strength and high toughness petroleum casing pipe at a steel grade with the yield strength of 170-180ksi, which adopts alloys such as C, Si, Mn, Cr, Mo, Ni and the
Grade A Carbon Steel (ASTM A53, A523, API 5L PSL1 ) Minimum Yield Strength:30,000 psi Maximum Yield Strength:None Minimum Tensile Strength:48,000 psi Notes:This grade may be used for standard pipe, line pipe, or conduit pipeas specified in the various ASTM and API specifications. Grade B Carbon Steel (ASTM A53, A523, API 
High Strength Low Alloy Steel - imoafoThe tensile strength of the established grades ranges up to 1500 MPa, with recent grades achieving 2000 MPa. Especially in those automotive steels where the yield strength exceeds 700 MPa, Mo alloying has its place. Just as in line pipe HSLA steel, Mo promotes the formation of bainitic microstructures that have higher strength than ferrite
High Strength and Heavy Wall Thickness Steel Pipes for JFE Steel has developed a series of high strength, heavy section round steel pipes from tensile strength (TS) class 4 0 N/mm2 to 780 N/mm2 (yield strength (YS) class 385 N/mm2 to 630 N/mm2) which suitable for these special projects, and has confirmed that these products satisfy the performance requirements of building con-struction applications.
Pipe O.D:W.T. Length(m) Min.Yield Strength(Mpa) In. Mm:245(B) 290(X42) 360(X52) 415(X60) 450(X65) 485(X70) 555(X80) 625(X90) 690(X100) 16:406:6.0-37.0:6.0-34.0:6.0-31.0:6.0-29.0:6.0-28.0:6.0-27.0:6.0-26.0:6.0-25.0:6.0-24.0:6.0-12.5:18:457:6.0-40.0:6.0-37.0:6.0-34.0:6.0-31.0:6.0-30.0:6.0-29.0:6.0-28.0:6.0-27.0:6.0-25.0:6.0-12.5:20:508:6.0-43.0:6.0-40.0:6.0-36.0:6.0-34.0:
LSAW Steel Pipe (Longitudinally Submerged Arc Welding Longitudinally welded steel pipes are used in onshore and offshore oil and gas pipelines requiring critical service, high performance and tight tolerances. LSAW pipe are also used in conveyance of flammable & nonflammable liquids, and as structural members in construction projects.
S690QL High Yield Strength SteelS690 QL is a special type of Alloy Quenched & Tempered steel plate having YS (i.e. Yield Strength) more than 690. This type of steel is specially used in structural purposes & is compliant with the standard EN 10025:6:2004. Offering high standards of weldebility and flexibility, this high yield strength plates are best suitable for all kinds of structural purposes.
The yield strength carbon steel galvanized pipe you can find on the site are generally built using hot-dipped technology to prevent rusting and weakening of the structural elements. With seamless welding quality, these yield strength carbon steel galvanized pipe are annealed with nitrogen protection and are polished with utter professionalism WELDING CONSUMABLES FOR PIPELINE CONSTRUCTIONThe range presented in this catalogue covers normal strength pipeline steel grades up to API X60/EN L415MB, high tensile grades up to API X100/ENL690MB, stand-ard stainless steel grades, duplex and super duplex stainless steel, nickel base alloy 625 and CRA clad pipes alloy 316L, 625 and 825.